LIFX Binary Protocol

To interact with LIFX devices you create packets and send those. A packet is a string of bytes that contains header and payload information. In Photons you create these using the objects listed below. For example DeviceMessages.SetPower can be made by saying:

from photons_messages import DeviceMessages


# An instruction that says to turn the device on
get_power = DeviceMessages.SetPower(level=65535)

The only information in the header that you need to care about are:

target

If you set this then that packet will only be sent to that particular device.

# Send to d073d5000001 regardless of the reference you use
# when you send the message
DeviceMessages.SetPower(level=0, target="d073d5000001")

ack_required

A boolean that tells the device to send back an acknowledgment and for Photons to then expect and wait for one:

# Note that ack_required is True by default
DeviceMessages.GetPower(level=0, ack_required=False)

res_required

A boolean that tells the device to send back a response and for Photons to then expect and wait for one:

# Note that res_required is True by default
DeviceMessages.SetPower(level=0, res_required=False)

The rest of the keyword arguments to the packet are related to the payload of the packet. Many messages have defaults and transformations for these fields.

Note

You can find a definition of the packets in this github repository and explanations on the LAN documentation.

Once you have one of these packet objects you can access fields like it’s a dictionary or like it’s an object:

msg = DeviceMessages.SetPower(level=65535)
assert msg.level == 65535
assert msg["level"] == "65535"

And you can change values the same way:

msg = DeviceMessages.SetPower(level=65535)
msg["level"] = 0
msg.level = 0

Some fields have transformations. For example duration on a LightSetPower is measured in milliseconds on the device, but I find it easier to specify it in seconds instead. And so Photons will take the value you provide and times it by 1000 to make it milliseconds. The value on the object is actually stored using the value that ends up in the binary packet and when you access that value, the opposite transformation is done to turn it back into seconds.

msg = LightMessagse.SetLightPower(level=0, duration=20)
assert msg.duration == 20
assert msg.actual("duration") == 20000

DeviceMessages
LightMessages
ButtonMessages
MultiZoneMessages
RelayMessages
TileMessages
Message Objects
Enums

DeviceMessages

DeviceMessages.GetHostFirmware

This packet has no fields

DeviceMessages.StateHostFirmware

uint64 - build: This attribute has no transformations
uint16 - version_minor: This attribute has no transformations
uint16 - version_major: This attribute has no transformations

DeviceMessages.GetWifiInfo

This packet has no fields

DeviceMessages.StateWifiInfo

float - signal: This attribute has no transformations

DeviceMessages.GetWifiFirmware

This packet has no fields

DeviceMessages.StateWifiFirmware

uint64 - build: This attribute has no transformations
uint16 - version_minor: This attribute has no transformations
uint16 - version_major: This attribute has no transformations

DeviceMessages.GetPower

This packet has no fields

DeviceMessages.SetPower

uint16 - level: This attribute has no transformations

DeviceMessages.StatePower

uint16 - level: This attribute has no transformations

DeviceMessages.GetLabel

This packet has no fields

DeviceMessages.SetLabel

string[32] - label: This attribute has no transformations

DeviceMessages.StateLabel

string[32] - label: This attribute has no transformations

DeviceMessages.GetVersion

This packet has no fields

DeviceMessages.StateVersion

uint32 - vendor: This attribute has no transformations
uint32 - product: This attribute has no transformations

DeviceMessages.GetInfo

This packet has no fields

DeviceMessages.StateInfo

uint64 - time

This attribute has no transformations

float - uptime

transformed: value from the packet is changed for you:

lambda _, v: v / 1e9

float - downtime

transformed: value from the packet is changed for you:

lambda _, v: v / 1e9

DeviceMessages.SetReboot

This packet has no fields

DeviceMessages.GetLocation

This packet has no fields

DeviceMessages.SetLocation

bytes[16] - location: This attribute has no transformations
string[32] - label: This attribute has no transformations
uint64 - updated_at: This attribute has no transformations

DeviceMessages.StateLocation

bytes[16] - location: This attribute has no transformations
string[32] - label: This attribute has no transformations
uint64 - updated_at: This attribute has no transformations

DeviceMessages.GetGroup

This packet has no fields

DeviceMessages.SetGroup

bytes[16] - group: This attribute has no transformations
string[32] - label: This attribute has no transformations
uint64 - updated_at: This attribute has no transformations

DeviceMessages.StateGroup

bytes[16] - group: This attribute has no transformations
string[32] - label: This attribute has no transformations
uint64 - updated_at: This attribute has no transformations

DeviceMessages.EchoRequest

bytes[64] - echoing: This attribute has no transformations

DeviceMessages.EchoResponse

bytes[64] - echoing: This attribute has no transformations

LightMessages

LightMessages.GetColor
LightMessages.SetColor
LightMessages.SetWaveform
LightMessages.LightState
LightMessages.GetLightPower
LightMessages.SetLightPower
LightMessages.StateLightPower
LightMessages.SetWaveformOptional
LightMessages.GetInfrared
LightMessages.StateInfrared
LightMessages.SetInfrared
LightMessages.GetHevCycle
LightMessages.SetHevCycle
LightMessages.StateHevCycle
LightMessages.GetHevCycleConfiguration
LightMessages.SetHevCycleConfiguration
LightMessages.StateHevCycleConfiguration
LightMessages.GetLastHevCycleResult
LightMessages.StateLastHevCycleResult

LightMessages.GetColor

This packet has no fields

LightMessages.SetColor

float - hue

transformed: Value you provide is changed for the binary packet:

lambda _, v: int(round(0x10000 * (0 if v is sb.NotSpecified else float(v)) / 360)) % 0x10000

float - saturation

transformed: Value you provide is changed for the binary packet:

lambda _, v: int(round(0xFFFF * (0 if v is sb.NotSpecified else float(v))))

float - brightness

transformed: Value you provide is changed for the binary packet:

lambda _, v: int(round(0xFFFF * (0 if v is sb.NotSpecified else float(v))))

uint16 - kelvin

default: 3500

float - duration

default: 0

transformed: Value you provide is changed for the binary packet:

lambda _, value: int(1000 * float(value))

LightMessages.SetWaveform

boolint - transient

default: 0

float - hue

transformed: Value you provide is changed for the binary packet:

lambda _, v: int(round(0x10000 * (0 if v is sb.NotSpecified else float(v)) / 360)) % 0x10000

float - saturation

transformed: Value you provide is changed for the binary packet:

lambda _, v: int(round(0xFFFF * (0 if v is sb.NotSpecified else float(v))))

float - brightness

transformed: Value you provide is changed for the binary packet:

lambda _, v: int(round(0xFFFF * (0 if v is sb.NotSpecified else float(v))))

uint16 - kelvin

default: 3500

float - period

default: 0

transformed: Value you provide is changed for the binary packet:

lambda _, value: int(1000 * float(value))

float - cycles

default: 1

float - skew_ratio

default: 0

transformed: Value you provide is changed for the binary packet:

lambda _, v: int(65535 * (0 if v is sb.NotSpecified else float(v))) - 32768

uint8 - waveform

default: photons_messages.enums.Waveform. SAW

enum: This attribute is a photons_messages.enums.Waveform

unknown enums: This attribute allows values that aren’t part of the enum

LightMessages.LightState

float - hue: This attribute has no transformations
float - saturation: This attribute has no transformations
float - brightness: This attribute has no transformations
uint16 - kelvin: default: 3500
uint16 - power: This attribute has no transformations
string[32] - label: This attribute has no transformations

LightMessages.GetLightPower

This packet has no fields

LightMessages.SetLightPower

uint16 - level

This attribute has no transformations

float - duration

default: 0

transformed: Value you provide is changed for the binary packet:

lambda _, value: int(1000 * float(value))

LightMessages.StateLightPower

uint16 - level: This attribute has no transformations

LightMessages.SetWaveformOptional

boolint - transient

default: 0

float - hue

optional: This attribute is optional

transformed: Value you provide is changed for the binary packet:

lambda _, v: int(round(0x10000 * (0 if v is sb.NotSpecified else float(v)) / 360)) % 0x10000

float - saturation

optional: This attribute is optional

transformed: Value you provide is changed for the binary packet:

lambda _, v: int(round(0xFFFF * (0 if v is sb.NotSpecified else float(v))))

float - brightness

optional: This attribute is optional

transformed: Value you provide is changed for the binary packet:

lambda _, v: int(round(0xFFFF * (0 if v is sb.NotSpecified else float(v))))

uint16 - kelvin

optional: This attribute is optional

float - period

default: 0

transformed: Value you provide is changed for the binary packet:

lambda _, value: int(1000 * float(value))

float - cycles

default: 1

float - skew_ratio

default: 0

transformed: Value you provide is changed for the binary packet:

lambda _, v: int(65535 * (0 if v is sb.NotSpecified else float(v))) - 32768

uint8 - waveform

default: photons_messages.enums.Waveform. SAW

enum: This attribute is a photons_messages.enums.Waveform

unknown enums: This attribute allows values that aren’t part of the enum

boolint - set_hue

default: true only if hue is given a value

boolint - set_saturation

default: true only if saturation is given a value

boolint - set_brightness

default: true only if brightness is given a value

boolint - set_kelvin

default: true only if kelvin is given a value

LightMessages.GetInfrared

This packet has no fields

LightMessages.StateInfrared

uint16 - brightness: This attribute has no transformations

LightMessages.SetInfrared

uint16 - brightness: This attribute has no transformations

LightMessages.GetHevCycle

This packet has no fields

LightMessages.SetHevCycle

boolint - enable: This attribute has no transformations
uint32 - duration_s: This attribute has no transformations

LightMessages.StateHevCycle

uint32 - duration_s: This attribute has no transformations
uint32 - remaining_s: This attribute has no transformations
boolint - last_power: This attribute has no transformations

LightMessages.GetHevCycleConfiguration

This packet has no fields

LightMessages.SetHevCycleConfiguration

boolint - indication: This attribute has no transformations
uint32 - duration_s: This attribute has no transformations

LightMessages.StateHevCycleConfiguration

boolint - indication: This attribute has no transformations
uint32 - duration_s: This attribute has no transformations

LightMessages.GetLastHevCycleResult

This packet has no fields

LightMessages.StateLastHevCycleResult

uint8 - result

enum: This attribute is a photons_messages.enums.LightLastHevCycleResult

unknown enums: This attribute allows values that aren’t part of the enum

ButtonMessages.GetButton

This packet has no fields

ButtonMessages.SetButton

uint8 - button_index: This attribute has no transformations
uint8 - buttons_count: This attribute has no transformations
bytes[808] - buttons: multiple: This attribute turns into an array of 8 Button objects

ButtonMessages.ButtonState

uint8 - total_count: This attribute has no transformations
uint8 - button_index: This attribute has no transformations
uint8 - buttons_count: This attribute has no transformations
bytes[808] - buttons: multiple: This attribute turns into an array of 8 Button objects

ButtonMessages.GetConfig

This packet has no fields

ButtonMessages.SetConfig

uint16 - haptic_duration_ms: This attribute has no transformations
uint16 - backlight_on_color_hue: This attribute has no transformations
uint16 - backlight_on_color_saturation: This attribute has no transformations
uint16 - backlight_on_color_brightness: This attribute has no transformations
uint16 - backlight_on_color_kelvin: This attribute has no transformations
uint16 - backlight_off_color_hue: This attribute has no transformations
uint16 - backlight_off_color_saturation: This attribute has no transformations
uint16 - backlight_off_color_brightness: This attribute has no transformations
uint16 - backlight_off_color_kelvin: This attribute has no transformations

ButtonMessages.StateConfig

uint16 - haptic_duration_ms: This attribute has no transformations
uint16 - backlight_on_color_hue: This attribute has no transformations
uint16 - backlight_on_color_saturation: This attribute has no transformations
uint16 - backlight_on_color_brightness: This attribute has no transformations
uint16 - backlight_on_color_kelvin: This attribute has no transformations
uint16 - backlight_off_color_hue: This attribute has no transformations
uint16 - backlight_off_color_saturation: This attribute has no transformations
uint16 - backlight_off_color_brightness: This attribute has no transformations
uint16 - backlight_off_color_kelvin: This attribute has no transformations

MultiZoneMessages

MultiZoneMessages.SetColorZones
MultiZoneMessages.GetColorZones
MultiZoneMessages.StateZone
MultiZoneMessages.StateMultiZone
MultiZoneMessages.GetMultiZoneEffect
MultiZoneMessages.SetMultiZoneEffect
MultiZoneMessages.StateMultiZoneEffect
MultiZoneMessages.SetExtendedColorZones
MultiZoneMessages.GetExtendedColorZones
MultiZoneMessages.StateExtendedColorZones

MultiZoneMessages.SetColorZones

uint8 - start_index

This attribute has no transformations

uint8 - end_index

This attribute has no transformations

float - hue

transformed: Value you provide is changed for the binary packet:

lambda _, v: int(round(0x10000 * (0 if v is sb.NotSpecified else float(v)) / 360)) % 0x10000

float - saturation

transformed: Value you provide is changed for the binary packet:

lambda _, v: int(round(0xFFFF * (0 if v is sb.NotSpecified else float(v))))

float - brightness

transformed: Value you provide is changed for the binary packet:

lambda _, v: int(round(0xFFFF * (0 if v is sb.NotSpecified else float(v))))

uint16 - kelvin

default: 3500

float - duration

default: 0

transformed: Value you provide is changed for the binary packet:

lambda _, value: int(1000 * float(value))

uint8 - apply

default: photons_messages.enums.MultiZoneApplicationRequest. APPLY

enum: This attribute is a photons_messages.enums.MultiZoneApplicationRequest

unknown enums: This attribute allows values that aren’t part of the enum

MultiZoneMessages.GetColorZones

uint8 - start_index: This attribute has no transformations
uint8 - end_index: This attribute has no transformations

MultiZoneMessages.StateZone

uint8 - zones_count

This attribute has no transformations

uint8 - zone_index

This attribute has no transformations

float - hue

transformed: value from the packet is changed for you:

lambda _, v: round(float(v) * 360 / 0x10000, 2)

float - saturation

transformed: value from the packet is changed for you:

lambda _, v: round(float(v) / 0xFFFF, 4)

float - brightness

transformed: value from the packet is changed for you:

lambda _, v: round(float(v) / 0xFFFF, 4)

uint16 - kelvin

default: 3500

MultiZoneMessages.StateMultiZone

uint8 - zones_count: This attribute has no transformations
uint8 - zone_index: This attribute has no transformations
bytes[64] - colors: multiple: This attribute turns into an array of 8 Color objects

MultiZoneMessages.GetMultiZoneEffect

This packet has no fields

MultiZoneMessages.SetMultiZoneEffect

uint32 - instanceid

default: randomly generated number

uint8 - type

default: photons_messages.enums.MultiZoneEffectType. MOVE

enum: This attribute is a photons_messages.enums.MultiZoneEffectType

unknown enums: This attribute allows values that aren’t part of the enum

float - speed

default: 5

transformed: Value you provide is changed for the binary packet:

lambda _, value: int(1000 * float(value))

float - duration

default: 0

transformed: Value you provide is changed for the binary packet:

lambda _, value: int(1e9 * float(value))

bytes[32] - parameters

dynamic: This attribute turns into a packet like object with these fields:

def multizone_effect_parameters_for(typ):
    if typ is enums.MultiZoneEffectType.MOVE:
        yield ("parameter1", T.Reserved(32))
        yield ("speed_direction", T.Uint32.enum(enums.Direction).default(enums.Direction.RIGHT))
        for i in range(6):
            yield ("parameter{0}".format(i + 2), T.Reserved(32))
    else:
        for i in range(8):
            yield ("parameter{0}".format(i), T.Reserved(32))

Using transformer:

lambda pkt: multizone_effect_parameters_for(pkt.type)))

You set parameters with a dictionary of fields and you can access the additional fields on parameters as if parameters is it’s own packet with those fields

MultiZoneMessages.StateMultiZoneEffect

uint32 - instanceid

default: randomly generated number

uint8 - type

default: photons_messages.enums.MultiZoneEffectType. MOVE

enum: This attribute is a photons_messages.enums.MultiZoneEffectType

unknown enums: This attribute allows values that aren’t part of the enum

float - speed

default: 5

transformed: value from the packet is changed for you:

lambda _, value: float(value) / 1000

float - duration

default: 0

transformed: value from the packet is changed for you:

lambda _, value: float(value) / 1e9

bytes[32] - parameters

dynamic: This attribute turns into a packet like object with these fields:

def multizone_effect_parameters_for(typ):
    if typ is enums.MultiZoneEffectType.MOVE:
        yield ("parameter1", T.Reserved(32))
        yield ("speed_direction", T.Uint32.enum(enums.Direction).default(enums.Direction.RIGHT))
        for i in range(6):
            yield ("parameter{0}".format(i + 2), T.Reserved(32))
    else:
        for i in range(8):
            yield ("parameter{0}".format(i), T.Reserved(32))

Using transformer:

lambda pkt: multizone_effect_parameters_for(pkt.type)))

You set parameters with a dictionary of fields and you can access the additional fields on parameters as if parameters is it’s own packet with those fields

MultiZoneMessages.SetExtendedColorZones

float - duration

default: 0

transformed: Value you provide is changed for the binary packet:

lambda _, value: int(1000 * float(value))

uint8 - apply

default: photons_messages.enums.MultiZoneExtendedApplicationRequest. APPLY

enum: This attribute is a photons_messages.enums.MultiZoneExtendedApplicationRequest

unknown enums: This attribute allows values that aren’t part of the enum

uint16 - zone_index

This attribute has no transformations

uint8 - colors_count

This attribute has no transformations

bytes[656] - colors

multiple: This attribute turns into an array of 82 Color objects

MultiZoneMessages.GetExtendedColorZones

This packet has no fields

MultiZoneMessages.StateExtendedColorZones

uint16 - zones_count: This attribute has no transformations
uint16 - zone_index: This attribute has no transformations
uint8 - colors_count: This attribute has no transformations
bytes[656] - colors: multiple: This attribute turns into an array of 82 Color objects

RelayMessages

RelayMessages.GetRPower
RelayMessages.SetRPower
RelayMessages.StateRPower

RelayMessages.GetRPower

uint8 - relay_index: This attribute has no transformations

RelayMessages.SetRPower

uint8 - relay_index: This attribute has no transformations
uint16 - level: This attribute has no transformations

RelayMessages.StateRPower

uint8 - relay_index: This attribute has no transformations
uint16 - level: This attribute has no transformations

TileMessages

TileMessages.GetDeviceChain
TileMessages.StateDeviceChain
TileMessages.SetUserPosition
TileMessages.Get64
TileMessages.State64
TileMessages.Set64
TileMessages.GetTileEffect
TileMessages.SetTileEffect
TileMessages.StateTileEffect

TileMessages.GetDeviceChain

This packet has no fields

TileMessages.StateDeviceChain

uint8 - start_index: This attribute has no transformations
bytes[880] - tile_devices: multiple: This attribute turns into an array of 16 Tile objects
uint8 - tile_devices_count: This attribute has no transformations

TileMessages.SetUserPosition

uint8 - tile_index: This attribute has no transformations
float - user_x: This attribute has no transformations
float - user_y: This attribute has no transformations

TileMessages.Get64

uint8 - tile_index: This attribute has no transformations
uint8 - length: This attribute has no transformations
uint8 - x: This attribute has no transformations
uint8 - y: This attribute has no transformations
uint8 - width: This attribute has no transformations

TileMessages.State64

uint8 - tile_index: This attribute has no transformations
uint8 - x: This attribute has no transformations
uint8 - y: This attribute has no transformations
uint8 - width: This attribute has no transformations
bytes[512] - colors: multiple: This attribute turns into an array of 64 Color objects

TileMessages.Set64

uint8 - tile_index

This attribute has no transformations

uint8 - length

This attribute has no transformations

uint8 - x

This attribute has no transformations

uint8 - y

This attribute has no transformations

uint8 - width

This attribute has no transformations

float - duration

default: 0

transformed: Value you provide is changed for the binary packet:

lambda _, value: int(1000 * float(value))

bytes[512] - colors

multiple: This attribute turns into an array of 64 Color objects

TileMessages.GetTileEffect

This packet has no fields

TileMessages.SetTileEffect

uint32 - instanceid

default: randomly generated number

uint8 - type

default: photons_messages.enums.TileEffectType. OFF

enum: This attribute is a photons_messages.enums.TileEffectType

unknown enums: This attribute allows values that aren’t part of the enum

float - speed

default: 5

transformed: Value you provide is changed for the binary packet:

lambda _, value: int(1000 * float(value))

float - duration

default: 0

transformed: Value you provide is changed for the binary packet:

lambda _, value: int(1e9 * float(value))

bytes[32] - parameters

dynamic: This attribute turns into a packet like object with these fields:

def tile_effect_parameters_for(typ):
    if typ is enums.TileEffectType.SKY:
        yield (
            "sky_type",
            T.Uint8.enum(enums.TileEffectSkyType).default(enums.TileEffectSkyType.CLOUDS),
        )
        yield ("parameter2", T.Reserved(24))
        yield ("cloud_saturation_min", T.Uint8.default(51))
        yield ("parameter4", T.Reserved(24))
        yield ("cloud_saturation_max", T.Uint8.default(178))
        yield ("parameter6", T.Reserved(184))
    else:
        for i in range(8):
            yield ("parameter{0}".format(i), T.Reserved(32))

Using transformer:

lambda pkt: tile_effect_parameters_for(pkt.type)))

You set parameters with a dictionary of fields and you can access the additional fields on parameters as if parameters is it’s own packet with those fields

uint8 - palette_count

This attribute has no transformations

bytes[128] - palette

multiple: This attribute turns into an array of 16 Color objects

TileMessages.StateTileEffect

uint32 - instanceid

default: randomly generated number

uint8 - type

default: photons_messages.enums.TileEffectType. OFF

enum: This attribute is a photons_messages.enums.TileEffectType

unknown enums: This attribute allows values that aren’t part of the enum

float - speed

default: 5

transformed: value from the packet is changed for you:

lambda _, value: float(value) / 1000

float - duration

default: 0

transformed: value from the packet is changed for you:

lambda _, value: float(value) / 1e9

bytes[32] - parameters

dynamic: This attribute turns into a packet like object with these fields:

def tile_effect_parameters_for(typ):
    if typ is enums.TileEffectType.SKY:
        yield (
            "sky_type",
            T.Uint8.enum(enums.TileEffectSkyType).default(enums.TileEffectSkyType.CLOUDS),
        )
        yield ("parameter2", T.Reserved(24))
        yield ("cloud_saturation_min", T.Uint8.default(51))
        yield ("parameter4", T.Reserved(24))
        yield ("cloud_saturation_max", T.Uint8.default(178))
        yield ("parameter6", T.Reserved(184))
    else:
        for i in range(8):
            yield ("parameter{0}".format(i), T.Reserved(32))

Using transformer:

lambda pkt: tile_effect_parameters_for(pkt.type)))

You set parameters with a dictionary of fields and you can access the additional fields on parameters as if parameters is it’s own packet with those fields

uint8 - palette_count

This attribute has no transformations

bytes[128] - palette

multiple: This attribute turns into an array of 16 Color objects

Message Objects

photons_messages.fields.Button

uint8 - actions_count: This attribute has no transformations
bytes[100] - actions: multiple: This attribute turns into an array of 5 ButtonAction objects

photons_messages.fields.Color

float - hue: This attribute has no transformations
float - saturation: This attribute has no transformations
float - brightness: This attribute has no transformations
uint16 - kelvin: default: 3500

photons_messages.fields.Tile

int16 - accel_meas_x: This attribute has no transformations
int16 - accel_meas_y: This attribute has no transformations
int16 - accel_meas_z: This attribute has no transformations
float - user_x: This attribute has no transformations
float - user_y: This attribute has no transformations
uint8 - width: This attribute has no transformations
uint8 - height: This attribute has no transformations
uint32 - device_version_vendor: This attribute has no transformations
uint32 - device_version_product: This attribute has no transformations
uint64 - firmware_build: This attribute has no transformations
uint16 - firmware_version_minor: This attribute has no transformations
uint16 - firmware_version_major: This attribute has no transformations

Enums

Some fields are enum values. This means the value on the binary packet is a number, but Photons lets you interact with them as Enum values. This means whenever you access an attribute that is an enum, you’ll get back the enum value rather than the number.

When you set a enum value you can use either the enum value itself, the number that enum represents, or the name of the value. For example all of the following do the same thing.

msg = TileMessages.SetTileEffect(...)

# These are all valid ways of setting an enum value.
msg.type = TileEffectType.MORPH
msg.type = "MORPH"
msg.type = 2

# The value photons gives back to you is always an enum value
assert msg.type is TileEffectType.MORPH

Photons will complain if the value you set is not a valid value for that type.

photons_messages.enums.Services

1 : UDP

photons_messages.enums.ButtonGesture

1 : PRESS
2 : HOLD
3 : PRESS_PRESS
4 : PRESS_HOLD
5 : HOLD_HOLD

photons_messages.enums.ButtonTargetType

2 : RELAYS
3 : DEVICE
4 : LOCATION
5 : GROUP
6 : SCENE
7 : DEVICE_RELAYS

photons_messages.enums.Direction

0 : RIGHT
1 : LEFT

photons_messages.enums.LightLastHevCycleResult

0 : SUCCESS
1 : BUSY
2 : INTERRUPTED_BY_RESET
3 : INTERRUPTED_BY_HOMEKIT
4 : INTERRUPTED_BY_LAN
5 : INTERRUPTED_BY_CLOUD
255: NONE

photons_messages.enums.MultiZoneApplicationRequest

0 : NO_APPLY
1 : APPLY
2 : APPLY_ONLY

photons_messages.enums.MultiZoneEffectType

0 : OFF
1 : MOVE

photons_messages.enums.MultiZoneExtendedApplicationRequest

0 : NO_APPLY
1 : APPLY
2 : APPLY_ONLY

photons_messages.enums.TileEffectSkyPalette

0 : CLOUDS_SKY
1 : NIGHT_SKY
2 : DAWN_SKY
3 : DAWN_SUN
4 : FULL_SUN
5 : FINAL_SUN
6 : NUM_COLOURS

photons_messages.enums.TileEffectSkyType

0 : SUNRISE
1 : SUNSET
2 : CLOUDS

photons_messages.enums.TileEffectType

0 : OFF
2 : MORPH
3 : FLAME
5 : SKY

photons_messages.enums.Waveform

0 : SAW
1 : SINE
2 : HALF_SINE
3 : TRIANGLE
4 : PULSE